Home > Flammability Test Equipment >

IEC60695 Flammability Test Equipment HWI Hot Ignition Wire Tester

Product Categories

IEC Test Equipment [85]
Medical Testing Equipment [17]
Ingress Protection Test Equipment [58]
Flammability Test Equipment [37]
Lithium Battery Testing Equipment [42]
LED Light Testing Equipment [18]
Test Finger Probe [54]
Environmental Test Chambers [14]
EV Battery Testing Equipment [19]
Test Gauges [10]

Dongguan Kingpo Technology Limited

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

IEC60695 Flammability Test Equipment HWI Hot Ignition Wire Tester

Brand Name : KINGPO

MOQ : 1

Parameter model : HWI-1

conforms to standard : IEC60695,GB4943

Anneal holder distance : 250mm

Power supply : AC 220V±10%,50Hz；110V,60Hz

Specimen holder distance : 70mm

Specimen high : 60mm

Contact Now

IEC60695 Flammability Test Equipment HWI Hot Ignition Wire Tester

IEC60695 Flammability Testing Equipment HWI Hot Wire Ignition Tester

Lab Equipment IEC60695 Hot Wire Ignition Tester , HWI Test Equipment

Product information:

This tester conforms to the standard requirement of IEC60695-2-20. It is suitable for electric and electronic products, household appliance materials to do ignition dangerous test. It simulates the heat source or ignition source of simulates glow component and overload resistance which may cause thermal stress in a short time.

Hot-wire coil ignition test adopts the specific size(ф0.5mm length:250mm)and specific material (Ni80/Cr20) of heater strip which is pre-annealed with required heating power(0.26W/mm) and time(8s～12s). Then coil heater strip on the specimen for 5 cycles according to certain wire wrapping tension (5.4N) and certain wire wrapping distance (6.35mm). Next, take the specimen with wrapping heater strip to test until 120s under the stipulate heating power (0.26W/mm) the users can judge the fire risk according to whether the specimen ignite and the ignite time.

Technical parameters:

Parameter model	HWI-1
conforms to standard	IEC60695-2-20,GB4943
Heating coil	ф0.5mm,Ni80/Cr20,length:250mm±5mm ,cold resistance 5.28Ω/m
Anneal holder distance	250mm
Specimen holder distance and height	70mm,high:60mm(the distance between the holder surface to the connector plate surface)
Wire wrapping tension and its distance	5.4N±0.05N,6.3mm±0.2mm(within 31.5mm±0.5mm,coil 5 cycle,national standard is 6mm)
Annealing time and power	8s～12s(1s～999.9s digital display can be preset),0.26W/mm±4%(digital display is adjustable)
Testing time and power	120s(1s～999.9s digital display can be preset),0.26W/mm±4%( digital display is adjustable)
Specimen size	L×W×H:(125 ± 5mm) ×(13.0 ± 0.5mm) ×(0.75+0.075 0mm,1.5+0.15 0mm,3+0.3 0mm)[ national standard is 0.75± 0.1 mm,1.5± 0.1 mm,3± 0.2 mm]
Combustion box volume	Greater than0.5 cube(can be order 0.75 cube,1cube)
Power supply	AC 220V±10%,50Hz；110V,60Hz

Hot Wire Ignition Test is a type of resistance test to fire for materials of enclosures and decorative parts. The sample is put on a specified stand and an element wire is winded around the material to be tested
Technical specification
The test sample is sourced by DC power
Element Wire 80% Nickel and 20% Chromium – 3 bobbins included
Power consumption 0.26 W/mm – means a current of 7 A to passes through the element wire
Digital Ammeter and Voltmeter
Terminal to connect the element wire

IEC60695 Flammability Test Equipment HWI Hot Ignition Wire Tester

Product Tags:

IEC60695 Flammability Test Equipment HWI Hot Ignition Wire Tester Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	Dongguan Kingpo Technology Limited
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!

IEC60695 Flammability Test Equipment HWI Hot Ignition Wire Tester

IEC60695 Flammability Test Equipment HWI Hot Ignition Wire Tester

IEC60695 Flammability Test Equipment

GB4943 Flammability Test Equipment

IEC 60695 Ignition Wire Tester

IEC60695 Flammability Test Equipment HWI Hot Ignition Wire Tester Images